AuditLok XL Simulator - Door Configuration
CONTINUE
Set Door Configuration:
If the door selected is behind another door, press the top Select button shows
the correct door number next to PREREQ. Door 1 is always the outer door
and should have no prerequisite. If you require two users to log in every
time to open the door press the top Select button until DUAL is set to YES,
otherwise leave this at NO. Use the second Select button to tell the electronics
whether the door actually exists on the safe. If the door does not physically
exist then EXISTS should be set to NO so the false door is not available
on user menus. SENSORS may be set to NONE, 1, or 1 & 2. The outer door
should have two sensors. The setting is changed by override for customers
when a door sensor fails (and changed back after the sensor is repaired).
Use Left Scroll or Right
Scroll buttons to edit other doors. Select DONE to
accept changes.
Press ESC to
exit.
|
