 |
|
Adjusting MgGunn Smart Products
These procedures apply to McGunn Smart Safe, Mini-Smart Safe, Smart Drop, Smart
Cashier, and Smart Lock safe models. Use the "Standard" procedure unless you
have an Economy version or an older model that does not have the master menu
on the main options screen. For the latter refer to the "Economy Models" procedure
(below).
For any unusual problems with DST, contact NKL Technical Service at (800)
452-4655.
Standard Clock Set Procedure:
- Enter the 8-digit Master Code and press E.
- Arrow down to the Master Menu and press E.
- Arrow down to DATE/TIME and press E.
- Press E until the cursor is under the digit you want to change.
- Enter the desired number.
- Once the correct time is entered: press * (star button) until the screen
reads ARE YOU SURE then press E to accept.
- At the idle screen verify the correct time is shown. If not, repeat the above
steps.
Economy Models Clock Set Procedure:
- Enter the Master Code and press E.
- Arrow down to OPEN SAFE DOOR and press E.
- While in the door delay enter the Master Code again and press E.
- Arrow down to IMMEDIATE OPEN and press E.
- The screen will read OPEN WINDOW and count up.
- Press E, enter the Master Code again, then press E.
- The screen will read OPEN SAFE DOOR.
- Turn the door handle and immediately press E (this will cause the Master
Menu to display).
- Arrow down to DATE/TIME and press E.
- Press E until the cursor is under the digit you want to change.
- Enter the desired number.
- Once the correct time is entered: press * (star button) until the screen
reads ARE YOU SURE then press E to accept.
- At the idle screen verify the correct time is shown. If not, repeat the above
steps.
|
|
